| English

Silicone monomers
Organo-chlorine products
Silicone polymers
Ethyl silicates and products on their base
Ethyl silicate-32
Ethyl silicate-40
Polymeric plugging materials AKOR
Plugging material COMPOUND 119-204
Varnish LBK-SL
Binders antiadhesive for precision casting
News About company Products Site map Contacts

Products > Ethyl silicates and products on their base > Polymeric plugging materials AKOR

    We offer following polymeric pluggin compounds AKOR:


  1. POLYMERIC PLUGGING COMPOUNDS AKOR-B


    Description:
    The polymeric plugging compounds AKOR-B100 and AKOR-B300 contain the blend of the polyethers of orthosililic acid of different polymerization degrees and a special additive.
    AKOR-B100 is a liquid substance of brown color which undergoes hydrolysis with water to form water soluble silanes which cure subsequently.
    AKOR-B300 is a liquid substance of brown color which undergoes hydrolysis with water to form water-soluble matters which then gelate and cure.
Physical and chemical characteristics
  THE NAME OF PARAMETERS AKOR-B100 AKOR-B300
  Density, +20C, g/cm3 0,98-1,10 0,90-0,99
  Ability to form with water an uniformly liquid system unseparable fluid unseparable fluid
  Volume fraction of precipitate upon dilution with water in proportion 1:3, %, max. 6,8 not specified
  Gelation, (755)C, hrs in proportion
AKOR-B100: water = 1:3
1,3 - 5 -
  Gelation, (755)C, hrs in proportion
AKOR-B300: water = 1:0,5
- 3
  Freezing temperature, minus 50 minus 50
  Dynamic viscosity, 20C, MPa.s 1-10 1-8

APPLICATIONS:

  • AKOR-B100 is designed for repair-and-insulation operations in boreholes at temperature from 10C to 120C (permissible temp. about 150C) as well as the soil consolidation and water proofing.
  • AKOR-B300 is designed for repair-and-insulation operations in boreholes at temperature from 120C to 300C as well as the soil consolidation and water proofing.
Shelf life 12 Months.


  2. POLYMERIC PLUGGING COMPOUNDS AKOR-BN


     Description: The polymeric plugging compound AKOR-BN contains the blend of the polyethers of orthosililic acid of different polymerization degrees and a special additive.
The plugging compound AKOR-BN is produced in a variety of grades as AKOR-BN100, AKOR-BN101, AKOR-BN102, AKOR-BN103, and AKOR-BN104 which differ in the amount of the precipitate upon dilution with water in proportion 1:3.
The AKOR-BNs undergo hydrolysis with water to form water-soluble substances which then cure / gelate.
Physical and chemical characteristics
  Density, 20C, g/cm3 0,98 - 1,10
  Ability to form an uniformly liquid system with water unseparable fluid
  Volume fraction of precipitate upon dilution with water in proportion 1:3, %, max.:
        AKOR-BN100 6,8
        AKOR-BN101 5,2
        AKOR-BN102 3,2
        AKOR-BN103 2,0
        AKOR-BN104 2,0
  Gelation, (755)C, hrs
Volume-to-volume proportion AKOR-BN : water = 1:3
1,3 - 6,0
  Freezing temperature, minus 50
  Dynamic viscosity, 20C, MPa.s 1 - 30

APPLICATIONS:

  • The AKOR-BNs are designed for repair-and-insulation operations in boreholes at temperature from 10C to 300C as well as the soil consolidation and water proofing. Also, they can be used as a binder for the investment-casing in different branches of industry
Shelf life - 12 Months
To main Mail us Top of the page
  Copyright © 2004 Kremnypolymer
  Created & hosted by Dmitry